ერთიანი ჩამრთველი (სენსორული) LightCore (2-gang)

Radio frequency bands

866.0–866.5 MHz 868.0–868.6 MHz 868.7–869.2 MHz 905.0–926.5 MHz 915.85–926.5 MHz 921.0–922.0 MHz

Depends on the sales region.

Maximum effective radiated power (ERP)

up to 20 mW

Radio signal modulation

GFSK

Radio communication range

up to 1,100 m

Between the device and a hub (or range extender) in an open space.

Encrypted radio communication

All the data stored and transmitted are protected by block encryption featuring a dynamic key.

Radio frequency hopping

Radio communication uses frequency hopping to prevent interception and jamming.

Key features

Automation scenarios

• security mode change reactions
• scheduled actions
• alarm reactions
• temperature scenarios
• humidity scenarios²
• CO₂ concentration scenarios²
• by pressing another LightSwitch/Button

2 — Scenarios by humidity and CO₂ concentrations are available when LifeQuality Jeweller is added to the system.

Operation without a neutral wire

LightSwitch only needs a live wire to operate.

Power of switched device

from 5 to 300 W per segment

Contactless touch-sensitive panel

LightSwitch is activated when a hand gets as close as 15 mm from the panel.

Night backlight

Optional, can be turned off in the Ajax app device settings.

Protection against incompatible devices

Triggers if lighting devices have insufficient power (up to 5 W). If protection is triggered, LightSwitch turns off the power and sends a notification to Ajax apps. For low-power lighting devices, the kit includes a capacitor.

Recommendations

The device is designed for indoor use only. A professional electrician should install the device.

Sabotage protection

Protection against spoofing

device authentication

Communication loss detection

after 36 s

Detection time depends on the Jeweller or Jeweller/Fibra settings.

Power supply

Power supply voltage

230 V~, 50/60 Hz

The device does not need a neutral wire to operate.

Average consumption

up to 200 mW

Maximum power

300 W per segment (600 W in total)

For LightCore (2-gang) Jeweller and LightCore (2-gang) vertical Jeweller.

Current protection

more than 2.6 A

If protection is triggered, LightSwitch turns off the power and sends a notification to Ajax apps.

Temperature protection

more than +60 °C

If protection is triggered, LightSwitch turns off the power and sends a notification to Ajax apps.

Operating parameters

Operating temperature range

from –10 °C to +40 °C

Operating humidity

up to 75% with no condensation

Protection class

IP20

Form factor of the switch

European type (55)